Program Your Remote

Program the Remote to Your TV

1. Turn on your TV.
2. Press and hold the PROG button for three seconds or until the LED turns on and then press the TV button. The LED will blink once and stay on.
3. Enter the 4-digit device code.
4. If the device code is valid, the LED will blink twice. If the device code is invalid, the LED will blink three times. From here, either input another code or cancel the remote programming by pressing the TV button.

Pairing the Remote to the Target Device (DTA)

Your remote can be paired with the DTA, allowing you to place the DTA out of the line of sight (e.g. behind your TV).

1. Turn on the target device (DTA).
2. Press and hold the PROG button until the LED turns on and then press the INFO button.
3. The LED on the remote will blink slowly.
4. When prompted, enter the 4-digit number.
5. The DTA will notify you whether or not the pairing was successful. If not, try another code until you find the correct one.

Unpairing the DTA

1. Press and hold the PROG button until the LED turns on.
2. Press 9 8 7. The LED will blink twice.

Switching Between DTA and TV Mode for Volume/Mute Control

To control DTA volume and mute, use the following steps:

1. Press and hold the PROG button until the LED turns on.
2. Press the VOL- button.
3. To control TV volume and mute:
   1. Press and hold the PROG button until the LED turns on.
   2. Press the VOL+ button.